Diagnostic Test
- DTC IS ACTIVE
- Turn the ignition on.
- With the scan tool, read RCM DTC's.
Is this DTC active?
Yes
- Repair the Output Terminal 15 circuit for a short to ground.
- Perform BODY VERIFICATION TEST - VER 1. Refer to DTC-Based Diagnostics/MODULE, Body Control (BCM) - Standard Procedure
No
- The condition that caused this symptom is currently not present. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also, inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals. Repair as necessary.
- Perform BODY VERIFICATION TEST - VER 1. Refer to DTC-Based Diagnostics/MODULE, Body Control (BCM) - Standard Procedure .