46B0-Rear Left Outlet Valve Circuit Performance: Testing
- ANTI-LOCK BRAKE MODULE INTERNAL CONDITION
- The Anti-lock Brake Module is reporting internal errors.NOTE: Before continuing, check the Anti-lock Brake Module harness connector terminals for corrosion, damage, or terminal push out. Repair as necessary.
- Using the schematics as a guide, inspect the wire harness and connectors. Pay particular attention to all Power and Ground circuits.
- Refer to any Technical Service Bulletins that may apply.
Were there any problems found?
Yes
- Repair as necessary.
- Perform ABS VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure
No
- Replace the Anti-lock Brake Module in accordance with the Service Information.
- Perform ABS VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure
- The Anti-lock Brake Module is reporting internal errors.