Event 1605, Event 1609, Event 1613, Event 1617, Event 1621, Event 1625, Event 1633, Event 1637, Event 1641, Event 1665-Fault Present In Transmission Control Module: Notes

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS article.

1. When Monitored: 

   Ignition on and battery voltage greater than 10 volts.

2. Set Condition: 

   An active DTC is stored in the Transmission Control Module. One Trip Fault. Three good trips to turn off the MIL.

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding.