Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2008 >> Nitro R/T, RWD >> Repair and Diagnosis >> Engine Performance >> System >> DTCS P2314 To U1418, System Checks, O2 Sensor Check, Checking Pcm Power And Ground Circuits, Engine Cranks But No Start >> U110C-Lost Fuel Level Message >> Diagnostic Test

Diagnostic Test

  1. ACTIVE DTC 

    Ignition on, engine not running.

    With the scan tool, select View Powertrain DTCs.

    Is the DTC Active at this time? 

    Yes 

    1. Go To  2.

    No 

    1. Refer to the INTERMITTENT CONDITION Diagnostic Procedure.
  2. U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE (TIPM) ALSO ACTIVE 

    With the scan tool, select View DTCs.

    Is the U0140-LOST COMMUNICATION WITH FRONT CONTROL MODULE (TIPM) also set? 

    Yes 

    1. Follow the diagnostics for U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE (TIPM)
    2. Perform POWERTRAIN VERIFICATION TEST .

    No 

    1. Replace and program the Powertrain Control Module per Service Information.
    2. Perform POWERTRAIN VERIFICATION TEST .
scientia non olet · About Mike's Workshop Manuals