Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2007 >> Sprinter 3500, Cab Chassis >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - 3.5L Gas >> O2 Sensor >> Removal >> Sensor-Oxygen 3.5L Gas

Sensor-Oxygen 3.5L Gas

  1. Disconnect the negative battery cable.
  2. Disconnect electrical connector from O2 sensor.
  3. Remove sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent.
scientia non olet · About Mike's Workshop Manuals