Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2006 >> Durango 4.7 N, 4WD, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control >> Switch-Speed Control >> Installation

Switch-Speed Control: Installation

  1. Position switch to steering wheel.
  2. Install switch mounting screw and tighten to 15 in. lbs. (1.7 N.m).
  3. Plug electrical connector into switch.
  4. Install airbag module. Refer to RESTRAINTS - SERVICE INFORMATION .
  5. Connect negative battery cable to battery.
scientia non olet · About Mike's Workshop Manuals