Instrument Cluster

The Instrument Cluster has easy-to-read instruments, is capable of CAN bus communication and provides a diagnostic function. The Instrument Cluster with analog speedometer, tachometer, fuel and coolant temperature gauges comes in two versions.

• Speedometer with outer miles-per-hour (mph) scale and inner kilometers-per-hour (km/h) scale. Coolant temperature is indicated in Fahrenheit (for US).
• Speedometer with outer kilometers-per-hour (km/h) scale and inner miles-per-hours (mph) scale. Coolant temperature is indicated in degrees Celsius (for Canada).

Below the speedometer, there is a LCD multifunction indicator in clear view of the driver. Warning and indicator lights (based on colored light emitting diodes) are located in the bottom of the instrument cluster with the exception of the turn signal indicator lights, ASR warning light and reserve fuel warning light. The warning lights for the seat belt usage and parking brake/brake fluid level are located in the line above the bottom line. The indicator that illuminates up when the parking brake is applied or the brake fluid level is low is different for U.S. and Canada.

When the key is turned to the 2nd position in the ignition, the function of the following indicator lights is checked automatically: High Beam ON, Preheating, airbag malfunction. In case of a broken LED of the airbag malfunction light, the seat belt usage warning light will flash for 6 seconds after the function check is finished. The Instrument Cluster is operated with the help of 4 buttons located below the multifunction indicator. The backlighting for the instrument cluster uses yellow LED's and can be adjusted electronically to daylight and darkness.

The instrument cluster includes a warning buzzer, which sounds (in addition to a warning light in some cases) when:

• The headlights are on with the ignition off and the door opened.
• The driver's seat belt is not fastened with the ignition on.
• The key is in the ignition and the door is open.
• Critical ASSYST information is displayed in the multifunction indicator.