Test failed conditions:

Test Failed - Active DTCs Present

Test Failed - Seat is Empty

Test Failed - Seat Occupied

Test Failed - Weight Above Threshold

Test Failed - Weight Below Threshold

Test Failed - Temperature Out of Range

Test Failed - Seat Pressure Too High

Test Failed - Seat Pressure Too Low

Test Failed - Seat Pressure Not Stable

Test Failed - Temperature Out of Range

Test Failed - Seat Pressure Too Low

Test Failed - Power Up Time Too Short

Test Failed - Power Up Time Too Long

Test Failed - K Empty Count is 0

Test Failed - No EOL Calibration

Test Failed - K Allow is FF

Allow the vehicle seat and interior temperature to stabilize, check voltage supplies and repair any other active DTCs before restarting the System Verification test.