Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2004 >> Durango 3.7 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Speed Control) >> Switch >> Installation

Section 98 (Speed Control): Switch: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install electrical connector to switch.
  2. Install switch and mounting screws.
  3. Tighten screws to 1.5 N.m (14 in. lbs.) torque.
  4. Install airbag module. Refer to AIR BAG RESTRAINT SYSTEMS .
  5. Connect negative battery cable.