Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2004 >> Caravan SXT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Servicing >> Removal & Installation >> Output Speed Sensor >> Installation

Output Speed Sensor: Installation

  1. Verify O-ring is installed into position. See Fig 1 .
  2. Install and tighten input speed sensor to 20 ft. lbs. (2 N.m).
  3. Connect speed sensor connector.
  4. Connect battery negative cable.
Fig 1: Inspecting Speed Sensor O-Ring
G00370768Courtesy of CHRYSLER CORP.
scientia non olet · About Mike's Workshop Manuals