Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2003 >> SRT-4 >> Repair and Diagnosis >> Transmission >> Manual Transaxle >> Synchronizer >> Assembly

Manual Transaxle: Synchronizer: Assembly

  1. Position synchronizer hub onto work bench. Hub is non-directional.
  2. Install springs into hub slot.
  3. Insert key into hub and spring.
  4. Apply petroleum jelly to the hole in the key. Insert balls into each key.
  5. Slide sleeve over the hub and depress balls as you carefully slip the sleeve into position.
scientia non olet · About Mike's Workshop Manuals