Section 3 (Engine Controls - Basic Diagnostic Procedures): Programming: Notes

WARNING: This page is about a different car, the 2002 Dodge Durango and 2002 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Programming procedures are written specifically for Chrysler's Diagnostic Readout Box (DRB-III(R)) scan tool. A generic scan tool may not be capable of performing all necessary programming functions.

NOTE: If the Powertrain Control Module (PCM) and the Sentry Key Immobilizer Module (SKIM) are replaced at the same time, program the VIN into the PCM first. See POWERTRAIN CONTROL MODULE . After programming PCM, program SKIM (if equipped). See SENTRY KEY IMMOBILIZER MODULE .