Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 5.9L >> Self-Diagnostic System >> Clearing Diagnostic Trouble Codes >> Using Scan Tool

Using Scan Tool

Turn ignition off. Connect scan tool to Data Link Connector (DLC), located under left side of instrument panel. SeeFigure. Turn ignition on. Using screen prompts on scan tool, erase DTCs from Powertrain Control Module (PCM).

scientia non olet · About Mike's Workshop Manuals