Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Driver Power Seat Switch >> Installation

Driver Power Seat Switch: Installation

  1. Position the power seat switch on the seat cushion side shield and connect the electrical connector.
  2. Install the screws that secure the power seat switch to seat cushion side shield.
  3. Install the seat cushion side shield on the seat. Refer to BODY article for the procedure.
  4. If equipped, install the recliner lever on the recliner mechanism release shaft.
  5. If equipped, install the screw that secures the recliner lever to the recliner mechanism release shaft on the outboard side of the front seat.
  6. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals