Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control >> Switch >> Installation

Speed Control: Switch: Installation

  1. Install electrical connector to switch.
  2. Install switch and mounting screws.
  3. Tighten screws to 1.5 N.m (14 in. lbs.) torque.
  4. Install airbag module. Refer to AIR BAG RESTRAINT SYSTEMS article for procedures.
  5. Connect negative battery cable.
scientia non olet · About Mike's Workshop Manuals