DTC P0700: Transmission Control System (Mil Request): Notes
NOTE:
For component location, see COMPONENT LOCATIONS
. For connector terminal identification, see CONNECTOR IDENTIFICATION
. For circuit identification and wiring diagram, see appropriate WIRING DIAGRAMS article.
NOTE:
If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See POWERTRAIN CONTROL MODULE
under PROGRAMMING. After each repair procedure has been completed, reconnect all components and perform TRANSMISSION VERIFICATION TEST VER-1 (45RFE/545REF)
under VERIFICATION TESTS to ensure system is functioning properly.
NOTE:
This PCM DTC is an informational DTC indicating an active Transmission DTC(s) is stored in the PCM.