Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Crankshaft Position Sensor Bolt
2.5L (1)
3.9L & 5.9L (2)
4.7L 21 (28)
Distributor Hold-Down Bolt 17 (23)
Downstream O2 Sensor 22 (30)
Driveshaft Crossmember Bolts 40 (54)
EVAP Canister-To-Mounting Bracket Nut 17 (23)
Fuel Pump Module Lock Nut 40 (54)
Fuel Rail Bolt
2.5L (3)
3.9L & 5.9L 17 (23)
4.7L 20 (27)
Fuel Tank Strap Nut 30-40 (41-54)
IAT Sensor 20 (27)
Park/Neutral Switch 25 (34)
Power Steering Pressure Switch 10-17 (14-23)
Spark Plug
Except 4.7L 26-30 (35-41)
4.7L 20 (27)
Throttle Body Bolt 3.9L & 5.9L 17 (23)
Upstream O2 Sensor 22 (30)
Wheel Lug Nut 100 (136)
INCH Lbs. (N.m) 
Air Cleaner Housing-To-Throttle Body Clamp 96 (10.8)
Camshaft Position Sensor Bolt (4.7L) 106 (12)
ECT Sensor 8 (11)
EVAP Leak Detection Pump Bolt 60 (7)
EVAP Purge Solenoid Nut 80 (9)
IAC Motor Bolt 60 (7)
Ignition Coil Bolt/Nut
2.5L, 3.9L & 5.9L (4)
4.7L 70 (8)
MAP Sensor Bolt 25 (3)
PCM Bolt 25-40 (3-5)
Throttle Body Bolt (2.5L & 4.7L) 100 (11)
TP Sensor Bolt 60 (7)
(1) Tighten bolts to 106 INCH lbs. (12 N.m).
(2) Tighten retaining bolts to 70 INCH lbs. (8 N.m).
(3) Tighten bolts to 100 INCH lbs. (11.3 N.m).
(4) On ignition coil using only bolts, tighten bolts to 50 INCH lbs. (5.6 N.m). On ignition coil using bolts and nuts, tighten bolts/nuts to 100 INCH lbs. (11.3 N.m).