Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Power Window Switch >> Removal & Installation (Driver Door Module)

Removal & Installation (Driver Door Module)

NOTE: Driver power window switch is integral with Driver Door Module (DDM).

Disconnect and isolate the negative battery cable. Using a flat-blade tool, gently pry DDM from driver door trim panel, starting at rear. Lift DDM from trim panel to access harness connectors. Disconnect harness connectors. Remove DDM. To install, reverse removal procedure.

scientia non olet · About Mike's Workshop Manuals