Chime Inoperative At All Times
Possible Cause:
- CTM - Chime inoperative.
CAUTION:
Always turn ignition off before disconnecting or connecting any control module connector. Failure to do so could result in damage to control module.
NOTE:
Ensure vehicle being tested has a fully charged battery. If it does not, false symptoms may occur.
NOTE:
For component location, see appropriate illustration under COMPONENT LOCATIONS
. For terminal identification, see appropriate illustration under CONNECTOR IDENTIFICATION
. For circuit and wire color identification, see WIRING DIAGRAMS
. For component removal and installation procedures, see appropriate component under REMOVAL & INSTALLATION
.
Testing:
- Replace CTM. Perform BODY VERIFICATION TEST under VERIFICATION TESTS.