Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2001 >> Durango 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Engine Sensors & Switches >> Manifold Absolute Pressure Sensor

Manifold Absolute Pressure Sensor

NOTE: For circuit identification and wiring diagram, see WIRING DIAGRAMS article. After each repair procedure has been completed, reconnect all components. Perform appropriate verification test to ensure system is functioning properly. Perform TEST VER-2: POWERTRAIN VERIFICATION  under VERIFICATION TESTS to ensure system is functioning properly.

Turn ignition off. Install vacuum "T" fitting and vacuum gauge at vacuum source on intake manifold. Start engine and allow engine to idle. If engine will not idle, maintain a constant RPM greater than idle. Note engine vacuum on vacuum gauge. Using scan tool, read Manifold Absolute Pressure (MAP) sensor vacuum. If MAP sensor vacuum is within one in. Hg of engine vacuum on vacuum gauge, MAP sensor is operating properly. Test is complete. If MAP sensor vacuum is not within one in. Hg of engine vacuum on vacuum gauge, replace MAP sensor.

scientia non olet · About Mike's Workshop Manuals