Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2000 >> Durango 4.7 N, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Body Control Modules) >> System Tests >> Vehicle Theft Security System (VTSS) >> EEPROM Checksum Failure

EEPROM Checksum Failure

WARNING: This page is about a different car, the 2000 Dodge Ram Wagon and 2000 Dodge Ram Van. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Perform VTSS VERIFICATION TEST  under VERIFICATION TESTS after each repair.

Turn ignition on. Using scan tool, clear Diagnostic Trouble Codes (DTC). Turn ignition off, then on. Using scan tool, read DTCs. If scan tool displays EEPROM CHECKSUM FAILURE, replace CENTRAL TIMER MODULE (CTM). See CENTRAL TIMER MODULE (CTM)  under REMOVAL & INSTALLATION. If scan tool does not display EEPROM CHECKSUM FAILURE, test is complete.

scientia non olet · About Mike's Workshop Manuals