CMTC Incorrect Mileage Or Distance Problems
WARNING: This page is about a different car, the 2000 Plymouth Breeze, 2000 Dodge Stratus, 2000 Chrysler Sebring, and 2000 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition on. Using scan tool, read engine information under monitor display. If scan tool displays NO RESPONSE, see PCM MESSAGE NOT RECEIVED; NO RESPONSE FROM PCM under COMMUNICATIONS. If scan tool does not display NO RESPONSE, go to next step.
- Observe Throttle Position (TP) sensor while depressing accelerator pedal. If TP sensor percent does not increase while operating throttle, see appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE. If TP sensor percent does increase, go to next step.
- Raise and support vehicle. Start vehicle and place transmission in Drive. Using scan tool, read vehicle speed signal. Increase vehicle speed and observe scan tool. If speed signal changes, system is currently operating correctly. If speed signal does not change, vehicle speed signal may be at fault. See appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE.