Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 1998 >> Intrepid Base, 3.2 J >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation & Overhaul - 3.2L >> Programming >> Pcm Programming & Clearing DTCS From Abs & SRS Modules

Pcm Programming & Clearing DTCS From Abs & SRS Modules

  1. Connect scan tool to Data Link Connector (DLC). For DLC location, see appropriate TESTS W/CODES article.
  2. Using scan tool, enter correct VIN and mileage into PCM. Using scan tool manufacturer's instructions, clear DTCs from ABS and SRS modules.
scientia non olet · About Mike's Workshop Manuals