Exterior Light Test 7A - Fog Lights Will Not Turn Off
NOTE:
Perform EXTERIOR LIGHT TEST 1A
before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION
. For wiring diagrams, refer to WIRING DIAGRAMS
. Perform, after each repair, VERIFICATION TEST VER-1A - VERIFICATION PROCEDURE
.
Turn headlight switch to OFF position. Disconnect headlight switch connector. Using external ohmmeter, measure resistance between ground and terminal No. 6 (Black wire). If resistance is less than 100 ohms, repair Black wire for short to ground. If resistance is 100 ohms or greater, replace headlight switch.