Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 1998 >> Caravan Base, 2.4 B >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Body Control Computer Tests >> Chime Test 4A - Chime Sounds With Driver's Door Open

Chime Test 4A - Chime Sounds With Driver's Door Open

NOTE: Perform CHIME TEST 1A  before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION  . For wiring diagrams, refer to WIRING DIAGRAMS  . Perform, after each repair, VERIFICATION TEST VER-1A - VERIFICATION PROCEDURE  .
CAUTION: Always turn ignition switch to OFF position prior to disconnecting any module connector.
  1. Ensure all interior and exterior lights are off. Remove ignition key and open driver's door. If chime does not sound, system is currently functioning correctly. If chime sounds, go to next step.
  2. Using scan tool, read key-in ignition switch status. If scan tool displays KEY-IN IGNITION SW: CLOSED, go to CHIME TEST 4B. If scan tool does not display KEY-IN IGNITION SW: CLOSED, replace Body Control Module (BCM). BCM is located with junction block under driver's side instrument panel. See Figure .
scientia non olet · About Mike's Workshop Manuals