Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 1995 >> Spirit 2.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.5L Flex Fuel >> Test TC-12D >> Idle Air Control Motor Circuits

Idle Air Control Motor Circuits

NOTE: For circuit and connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagrams, see WIRING DIAGRAMS - 2.5L FLEXIBLE FUEL article.
  1. Turn ignition off. Disconnect Powertrain Control Module (PCM) connector. Inspect PCM connector for damaged or pushed out terminals. Repair as necessary. Perform TEST VER-2. If PCM connector terminals are okay, go to next step.
  2. Using an external ohmmeter, check resistance of Gray/Red wire between IAC motor connector and PCM connector terminal No. 39. If resistance is more than 5 ohms, repair open in Gray/Red wire. Perform TEST VER-2. If resistance is less than 5 ohms, replace PCM. Perform TEST VER-2.
scientia non olet · About Mike's Workshop Manuals