Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 1995 >> Caravan Base, 2.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.3L Gasoline >> Verification Tests >> Test VER-1 - No Start Verification Procedure

Test VER-1 - No Start Verification Procedure

  1. Ensure all engine components are connected. Re-assemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change oil and filter if necessary. Attempt to start engine.
  2. If engine does not start, check if any Technical Service Bulletins (TSBs) apply to vehicle and return to TEST TC-1A, if necessary.
  3. If engine starts and Powertrain Control Module (PCM) was replaced, repair is complete.
  4. If engine starts and PCM was not replaced, connect scan tool to data link connector and erase DTCs. Repair is complete.
scientia non olet · About Mike's Workshop Manuals