Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 1993 >> Grand Caravan Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer >> Connector Identification >> Test 39A - Diagnosing No Chime With Headlights On

Test 39A - Diagnosing No Chime With Headlights On

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagrams, see WIRING DIAGRAMS article in the ENGINE PERFORMANCE Section. Perform TEST VER - 1A after each repair.
  1. Remove key from ignition, turn headlights on and open driver's door. If chime operates, system is operating properly at this time. If chime does not operate, read left front door ajar switch status using DRB-II. If DRB-II displays LFDOOR AJAR:CLOSED, go to next step. If DRB-II does not display LFDOOR AJAR:CLOSED, go to TEST 40A.
  2. Using DRB-II, read headlight status. If DRB-II does not display HEADLIGHTS ON, go to TEST 8A. If DRB-II displays HEADLIGHTS ON, use DRB-II to read ignition voltage. If voltage is less than 10 volts, go to TEST 38B. If voltage is more than 10 volts, replace body controller.
scientia non olet · About Mike's Workshop Manuals