Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 1993 >> Grand Caravan Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - Gasoline >> Fuel System >> Fuel System Pressure Release >> 2.5L

Fuel System Pressure Release: 2.5L

  1. Loosen fuel filler cap to release tank pressure. Disconnect injector wiring harness from engine harness. Connect a jumper wire between terminal No. 1 of injector harness connector and engine ground. See Figure.
  2. Connect one end of second jumper wire to terminal No. 2 of injector harness connector, and touch other end to battery positive for no more than 5 seconds. This releases system pressure. Remove jumper wires.
scientia non olet · About Mike's Workshop Manuals