Conditions For Setting DTC

No intrusive tests active.
DTC(s) P0106, P0107, P0108, P0112, P0113, P0117, P0118, P0121, P0122, P0123, P0131, P0132, P0133, P0134, P0137, P0138, P0140, P0141, P0201, P0202, P0203, P0204, P0336, P0337, P0341, P0342, P0351, P0352, P04024, P0404, P0405, P0406, P0506, P0507, P1130, P1133, P1134, P1171, P1404, P1441 and P1627 not set.
The average of short term fuel trim sample is greater than or equal to 125 and average of adaptive index multiplier samples is greater than or equal to 165.
The Throttle Position (TP) is less than 95%.
The engine speed is greater than 400 rpm but less than 6000 rpm.
The Barometric Pressure (BARD) is greater than 72.3 kPa.
The coolant temperature is between 24.5°C (76.1°F) and 125°C (257°F) for M/T and 99.5°C (211.1°F) for A/T.
The Manifold Absolute Pressure (MAP) is between 24 and 99 kPa
The Manifold Absolute Temperature (MAT) is between -40°C (-40°F) and 120°C (248°F)
The airflow is between .008 and 200 g/sec.
The vehicle speed is less than 85 mph (136 km/h).
The system is in closed loop.
The adaptive index is ready.
The canister purge is enabled
The system voltage is greater than 41 volts for M/T and 9.5 volts for A/T.