Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2025 >> Pacifica Pinnacle, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Power Distribution) >> Module, Power Inverter >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  3. Working within the storage compartment, remove the fasteners (1a) and remove the power inverter module with support bracket (1b).
    GC0165513Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the electrical connection (2) from the power inverter module.
  5. Separate the power inverter module from the bracket.
scientia non olet · About Mike's Workshop Manuals