Air Temperature Intake Sensor

REMOVAL 

1. Disconnect and isolate the negative battery cable.
2. Disconnect the inlet air temperature sensor wire harness connector and detach wire from retainer.
   NOTE:

   Clean any dirt from around the sensor area prior to removing from the air cleaner resonator.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Inlet Air Temperature Sensor Wire Harness Connector

   2 - Retainer

3. Remove the inlet air temperature sensor from the air cleaner resonator by turning the sensor 1/4 turn in the counter - clockwise direction.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Inlet Air Temperature Sensor

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.