Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2023 >> Pacifica Hybrid Pinnacle >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Rear Driveline Module) >> Sensor, Pressure >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
GC0200283Courtesy of CHRYSLER GROUP, LLC
  1. Replace the pressure sensor with pre-applied sealant to the threads.
  2. Tighten the pressure sensor to the proper torque specification. Refer to: TORQUE SPECIFICATIONS .
  3. Connect the pressure sensor wire harness connector (1).
scientia non olet · About Mike's Workshop Manuals