Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2023 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Active Damping Control (ADCM) >> Removal

Module, Active Damping Control (ADCM): Removal

GC0152157Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the left side inner trunk fasteners and position the carpet aside.
  3. Disconnect the wire harness connectors and remove the bolts (2) securing the Adaptive Damping Control Module (ADCM).
  4. Release the integral latches securing the ADCM (1) to the mounting bracket and slide the module upward to remove from the vehicle.
scientia non olet · About Mike's Workshop Manuals