Module, Active Damping Control (ADCM): Installation

Courtesy of CHRYSLER GROUP, LLC

1. Slide the Active Damping Control Module (ADCM) (1) into position making sure the latches secure the ADCM.
2. Install the Active Damping Control Module retaining bolts (2). Tighten the bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS. 
3. Connect the wire harness connectors to the ADCM.
4. Position the carpet back in the original location and install the fasteners.
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
6. Perform the ADCM Verification Test.