Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2022 >> Pacifica Hybrid Pinnacle >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Adaptive Cruise Control (Acc) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the ACC module with bracket to the grille and line up properly for installing the fasteners.
  2. Install and tighten the fasteners to secure the bracket with module to the grille.
  3. Install the AGS. Refer to GRILLE, ACTIVE SHUTTER, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Using the scan tool, perform the ACC alignment procedure.
scientia non olet · About Mike's Workshop Manuals