Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2019 >> Pacifica L, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Anti-Lock Brake System (Abs) >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177720Courtesy of CHRYSLER GROUP, LLC
  1. Carefully place the antilock brake system (ABS) module in position on the hydraulic control unit (HCU).
  2. Install the four ABS module to HCU mounting bolts (3).
  3. Connect the ABS electrical harness connector (1).
  4. Install the washer solvent fill tube into the top of the washer solvent reservoir, and install the mounting screw (2).
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  6. Perform the Verification Test and clear and faults. Refer to STANDARD PROCEDURE .
scientia non olet · About Mike's Workshop Manuals