Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Intrusion Transceiver (ITM) >> Installation

Module, Intrusion Transceiver (ITM): Installation

GC0146812Courtesy of CHRYSLER GROUP, LLC
  1. Position the Intrusion Transceiver Module (ITM) (2) into the mount integral to the overhead console housing. Be certain that all of the latch features are fully engaged
  2. Connect the intrusion module sensor pigtail wire harness connector (1) to the ITM.
    GC0146811Courtesy of CHRYSLER GROUP, LLC
  3. Install the overhead console into the headliner. Refer to CONSOLE, OVERHEAD, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About Mike's Workshop Manuals