Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

Replace the Occupant Classification Module (OCM)

Make sure the battery is fully charged.
Turn the ignition off, wait ten seconds and turn ignition on.
With the scan tool, read the OCM DTC.
Did the scan tool display active or stored B2212-00-OCCUPANT CLASSIFICATION MODULE INTERNAL DTC?

Yes
- Replace the OCCUPANT CLASSIFICATION MODULE (OCM). Refer to REMOVAL AND INSTALLATION
  .
- Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST .
No
- Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST .