Torque Specifications: Notes
WARNING: This page is about a different car, the 2015 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER* |
|---|---|---|---|---|
| Damper to PTU | 26 | 19 | - | - |
| Heat Shield to PTU | 14 | 10 | - | - |
| Intake Manifold Support to PTU Bracket | 12 | 9 | - | - |
| Mounting Bracket to PTU | 22 | 16 | - | - |
| PTU Fill Plug | 40 | 30 | - | - |
| PTU to Transmission Flange | 48 | 35 | - | - |
| On used fasteners that have a thread locker patch use Mopar® Lock & Seal Adhesive. | ||||
| *NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. | ||||