Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Powertrain Control Module (Pcm) - Electrical Diagnostics - 62TE Automatic Transmission >> DTC Troubleshooting >> P0846-2/4 Pressure Switch Rationality >> Set Condition

Set Condition

The DTC is set if the 2/4 pressure switch is open or closed at the wrong time in a given gear. If the problem is identified for three successive ignition starts, the transmission will go into Limp-in mode and the MIL will turn on after 10 seconds of vehicle operation.