Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Powertrain Control Module (Pcm) - Electrical Diagnostics - 62TE Automatic Transmission >> DTC Troubleshooting >> P0712-Transmission Temperature Sensor Low >> Set Condition

Set Condition

The DTC will set when the monitored Temperature Sensor voltage drops below 0.078 of a volt for the period of 1.45 seconds. When the fault is set, calculated temperature is substituted for measured temperature, however the fault code is stored only after three consecutive occurrences of the fault.

scientia non olet · About Mike's Workshop Manuals