Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Power Top Control Module ( PTCM) - Electrical Diagnostics) >> DTC Troubleshooting >> B2544-DECKLID Latch Limit Switch/DECKLID Position Sensor Correlation >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
(Q974) DECKLID LATCHED LIMIT SWITCH SIGNAL CIRCUIT SHORTED TO GROUND
(Q975) DECKLID POSITION SIGNAL CIRCUIT SHORTED TO GROUND
DECKLID LATCHED LIMIT SWITCH
DECKLID POSITION SENSOR
POWER TOP CONTROL MODULE (PTCM)

Always perform the Power Top System Pre-Diagnostic procedure before proceeding. Refer to  STANDARD PROCEDURE  . 

scientia non olet · About Mike's Workshop Manuals