Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Engine Performance >> System >> 3.6L - DTCS P0155 To P0455 >> Diagnosis And Testing >> P0440-General EVAP System Failure >> Set Condition

Set Condition

When the monitor conditions are met, the Powertrain Control Module (PCM) will ramp in purge flow. If the PCM does not sense an ESIM Switch closure after a calculated amount of purge flow accumulation, an error is detected. Two Trip Fault. Three good trips to turn off the MIL.

scientia non olet · About Mike's Workshop Manuals