Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2010 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> CAPACITOR, Ignition >> Removal >> 2.0, 2.4L

2.0, 2.4L

Fig 1: IGNITION CAPACITOR
GC0084713Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable at battery.
  2. Remove electrical connector (1).
  3. Remove mounting bolt (3) and ignition capacitor (2).
scientia non olet · About Mike's Workshop Manuals