Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2010 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows - Non-DTC-Based Diagnostics >> Diagnosis and Testing >> Driver Window Not Calibrated/Lost Calibration - JS27 Only >> Notes

Driver Window Not Calibrated/Lost Calibration - JS27 Only: Notes

For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article(s).

Possible Causes 
MODULE NOT CALIBRATED
MODULE NOT DENORMALIZED
DRIVER DOOR MODULE (DDM)
NOTE: Anytime a window or window regulator is replaced, this procedure must be used. This condition may also happen when the battery or the door module connector is disconnected.
scientia non olet · About Mike's Workshop Manuals