Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, EDG >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> COIL, Ignition >> Installation >> 2.0, 2.4L

2.0, 2.4L

Fig 1: Removing/Installing Ignition Coil
GC0082371Courtesy of CHRYSLER LLC
  1. Install ignition coil.
    Fig 2: Removing/Installing Ignition Coil Mounting Bolts
    GC0082370Courtesy of CHRYSLER LLC
  2. Tighten bolt to 9 N.m (79.5 in. lbs.).
  3. Connect electrical connectors and lock.
  4. Install the negative battery cable.
scientia non olet · About Mike's Workshop Manuals