Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Can Communication System - Non-DTC Diagnostics) >> Diagnosis and Testing >> No Response From ITM (Intrusion Transceiver Module) >> Notes

No Response From ITM (Intrusion Transceiver Module): Notes

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ITM (Intrusion Transceiver Module) Circuit Schematic
GC0124296Courtesy of CHRYSLER LLC

For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article(s).

Possible Causes 
(A415) (A418) FUSED B (+) CIRCUITS OPEN OR SHORTED
(Z907) (Z910) GROUND CIRCUITS OPEN
(D55) AND (D54) CAN B BUS CIRCUITS OPEN
INTRUSION TRANSCEIVER MODULE