Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Starting System (Service Information)) >> Specifications >> Starter Motor

Starter Motor

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
STARTER MOTOR

Engine Application Power Rating Cranking Amperage Draw Test
2.0L Diesel 2.0 Kilowatt / 2.7 Horsepower 150 - 400 Amperes
2.0, 2.4L 1.2 Kilowatt / 1.6 Horsepower 150 - 280 Amperes
2.7L 1.2 Kilowatt / 1.6 Horsepower 100 - 300 Amperes
3.5L 1.2 Kilowatt / 1.6 Horsepower 100 - 300 Amperes
* Test at operating temperature. Cold engine, tight (new) engine, or heavy oil will increase starter amperage draw.
**The starter is equipped with permanent magnets. Never strike the starter case to attempt to loosen a sticking/stuck armature as permanent magnets may crack or break.
scientia non olet · About Mike's Workshop Manuals