Diagnostic Test

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

DTC IS ACTIVE
1. Ignition on, engine not running.
2. With the scan tool, read DTCs in the DTCM.
  Is the status Active for this DTC?
  
  Yes
  - Replace the Drive Train Control Module (DTCM) in accordance with the Service Information.
  - Perform the DTCM VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Drivetrain Control (DTCM) - Standard Procedure .
  No
  - Test Complete.